Hardware compatible with Froozbooth

Cameras, printers and computers: what the booth controls natively, what goes through Windows, and what does not work.

Updated:

Cameras

BrandModelsLevelConnectionWhat to know
CanonEOS DSLR and mirrorless cameras supported by the Canon SDK (EDSDK)Native controlUSBCanon SDK bundled in the installer, nothing else to install. Live view during the countdown, focus started ahead of the shot, photo also kept on the SD card. Only one program can drive the camera: close EOS Utility and EOS Webcam Utility.
NikonNikon DSLRs (from the D90 on) and Nikon Z mirrorless camerasNative controlUSB (PTP, Windows driver)No Nikon software to install. Live view and focus during the countdown. The photo goes through the camera’s buffer, with no dependency on the SD card. Set image quality to JPEG; close Nikon Transfer and NX Tether.
Any brandAny webcam Windows recognizes, built-in cameras includedThrough WindowsUSB or built-inPick the camera in the booth admin, no restart needed.
Sony, Fujifilm, PanasonicCameras from other brandsWorkaroundMaker’s webcam utility or HDMI capture cardThe booth sees the camera as a webcam: no native control (shutter, focus) and no full-resolution photo.

Printers

BrandModelsLevelConnectionWhat to know
DNPDS620, DS820, DS-RX1, QW410
Verified at a live event: DS620
Model-specific supportUSB, DNP Windows driver2-inch cut set by the booth on every strip print: two 2x6 strips on one 4x6 sheet. The Windows queue is found even if its name changes (“DP-DS620”, “DNP DS620”).
DNPDS40, DS80 and other DNP modelsThrough WindowsUSB, DNP Windows driverPrint through their Windows driver. The 2-inch cut is requested the same way, but has not been verified on these models: run a test print during the trial.
CitizenCY-02Model-specific supportUSB, Citizen Windows driverDriver paper sizes recognized by their dimensions, including double 4x6 sizes, which require a 6x8 roll.
Citizen (other models), Mitsubishi, HiTi, Kodak…Any printer installed on Windows, inkjet and laser includedThrough WindowsMaker’s Windows driverNo approved-model list: if Windows prints, the booth prints. Paper size is picked by its dimensions (4x6, 2x6 strips).

Computers

BrandModelsLevelConnectionWhat to know
WindowsWindows 10 or 11, 64-bitNative controlWindows installerLaptop, mini PC or Windows tablet. The service that drives the camera and printer is included, with no runtime to install. Works offline during the event.
Mac, Chromebook, iPadRecent web browserWorkaroundWeb booth, nothing to installDevice camera or USB webcam. No DSLR control and no silent printing: those remain specific to the Windows booth. Counts as one machine of the plan.
Linux, macOSInstalled appNot supported—No native app for Linux or macOS: use the web booth in the browser.

Print formats

  • 4x6 in photo (10x15 cm)
  • 2x6 in strips, two per 4x6 sheet

Support levels

  • Native control: The booth drives the device directly: live view, focus, shutter.
  • Model-specific support: Prints through the Windows driver, with model-specific settings the booth applies to every print.
  • Through Windows: Works as soon as Windows recognizes the device, with no model-specific settings.
  • Workaround: Usable, but without native control.
  • Not supported: Not available.

Check with your own gear

That is what the 15-day trial, with no credit card, is for: plug in your camera and printer, and run a test print from the booth admin. A model missing from the list? Write to us.

The guide: DSLR photo booth software for Canon and Nikon

This list as JSON

Ready for your next event?